Ogden City 0-4-2 Locomotives of the USA


Class Details by Steve Llanso of Sweat House Media

Class 10 (Locobase 11610)

Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University, Vol 15, p. 61. See also Utah Rails, http://utahrails.net/ogden/ogden-electric-street.php, last accessed 14 August 2010. Works numbers were 9955 in April 1889; 10442 in November 1889; 10950-10951 in June 1890; and 11336-11337 in November.

Ogden was among the many cities of every size that adopted steam power for its street railways and Baldwin had an appropriately sized engine for the city's requirement. Utah Rails notes that in addition to the steam dummies shown in this entry, the OCR bought a Shay locomotive. UR noted that its "...geared drive train ...allowed it to travel over uneven streets and turn the sharp corners found on typical street railways."

The whole enterprise was bankrupt by late 1890 and the Ogden Electric Railway took it over, to be followed almost immediately (19 May 1900) by its rescuer, the Ogden Rapid Transit Company.

All of the dummies found other homes. 10 went to work with the Union Railway company, 100 served the Imperial Manufacturing and Importing Company. The last three went to other street railways: 101 to the Salt Lake & Ogden (3 1/2 miles long with 40-lb/yard raile), the 6 to Provo Street Railway, and the 8 to the Great Salt Lake & Hot Springs.

Specifications by Steve Llanso of Sweat House Media
Class10
Locobase ID11610
RailroadOgden City
CountryUSA
Whyte0-4-2T
Number in Class5
Road Numbers100-101, 6, 8
GaugeStd
Number Built5
BuilderBurnham, Parry, Williams & Co
Year1889
Valve GearStephenson
Locomotive Length and Weight
Driver Wheelbase 4.50'
Engine Wheelbase 9.67'
Ratio of driving wheelbase to overall engine wheebase 0.47
Overall Wheelbase (engine & tender) 9.67'
Axle Loading (Maximum Weight per Axle)
Weight on Drivers
Engine Weight
Tender Light Weight
Total Engine and Tender Weight
Tender Water Capacity300 gals
Tender Fuel Capacity (oil/coal)
Minimum weight of rail (calculated)0
Geometry Relating to Tractive Effort
Driver Diameter35"
Boiler Pressure130 psi
Cylinders (dia x stroke)10" x 14"
Tractive Effort4420 lbs
Factor of Adhesion (Weight on Drivers/Tractive Effort)
Heating Ability
Firebox Area35 sq. ft
Grate Area 8.70 sq. ft
Evaporative Heating Surface269 sq. ft
Superheating Surface
Combined Heating Surface269 sq. ft
Evaporative Heating Surface/Cylinder Volume211.37
Computations Relating to Power Output (More Information)
Robert LeMassena's Power Computation1131
Same as above plus superheater percentage1131
Same as above but substitute firebox area for grate area4550
Power L12646
Power MT


If you have any railroad data such as diagram books, rail station plans or anything else that you would be willing to share, please contact us.