Mengel Box Company 2-4-2 "Columbian" Locomotives of the USA


Class Details by Steve Llanso of Sweat House Media

Class 3 (Locobase 13496)

Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University, Volume 30 and Volume 36, p. 113, Volume 65, pp. 182+. Works numbers were 33026 in November 1908, 35080 in August 1910, 53257-53258 in May 1920, and 54325 in January 1921.

A much bigger logger than the saddle tank delivered a year before (Locobase 13180), the 3 rolled on a wheel arrangement rarely used in North America, particularly set up as a tender engine. Its roadbed held 56-60-lb/yard (28-30 kg/metre) rail and a note on a later order explained that the class would be "run as much backward as forward". Its sister arrived two years later, followed ten years later by the 2nd 1-2, and eight months after that by the second #3.

After the 3's delivery, a 12/12/08 note commented: "Curves are 46 degrees [!] on which the engine operates after being altered by Engr. Jackson."

4 operated on the Timber Railroad of the Mengel empire near Hickman, Ky. Its sale to Island Logging Company of Duncan, British Columbia as their #1 was followed in 1924 by that company's disposal of the 3 to locomotive rebuilder/reseller Southern Iron & Equipment in 1924. SI & E found a ready buyer in Jacksonville, Fla in the form of LeMacks Cannon Lumber.

Gene Connelly's list does not account for the second 1 & 2, but notes that the second 3 was sold to Georgia Car & Locomotive in 1928, who recycled it to Woodward Walker Lumber of Heflin, La in May 1928. WWL quickly sold the engine to Melton Lumber of Newllton, La in August of the same year as their #1.

Specifications by Steve Llanso of Sweat House Media
Class3
Locobase ID13,496
RailroadMengel Box Company
CountryUSA
Whyte2-4-2
Number in Class5
Road Numbers3-4, 1-2, 3 (2nd)
GaugeStd
Number Built5
BuilderBurnham, Williams & Co
Year1908
Valve GearStephenson
Locomotive Length and Weight
Driver Wheelbase (ft)7
Engine Wheelbase (ft)21.58
Ratio of driving wheelbase to overall engine wheebase 0.32
Overall Wheelbase (engine & tender) (ft)21.58
Axle Loading (Maximum Weight per Axle) (lbs)
Weight on Drivers (lbs)53,000
Engine Weight (lbs)73,000
Tender Loaded Weight (lbs)50,000
Total Engine and Tender Weight (lbs)123,000
Tender Water Capacity (gals)2500
Tender Fuel Capacity (oil/coal) (gals/tons)5
Minimum weight of rail (calculated) (lb/yd)44
Geometry Relating to Tractive Effort
Driver Diameter (in)44
Boiler Pressure (psi)160
High Pressure Cylinders (dia x stroke) (in)14" x 22"
Tractive Effort (lbs)13,328
Factor of Adhesion (Weight on Drivers/Tractive Effort) 3.98
Heating Ability
Firebox Area (sq ft)69.70
Grate Area (sq ft)12.70
Evaporative Heating Surface (sq ft)872
Superheating Surface (sq ft)
Combined Heating Surface (sq ft)872
Evaporative Heating Surface/Cylinder Volume222.46
Computations Relating to Power Output (More Information)
Robert LeMassena's Power Computation2032
Same as above plus superheater percentage2032
Same as above but substitute firebox area for grate area11,152
Power L13653
Power MT303.90


If you have any railroad data such as diagram books, rail station plans or anything else that you would be willing to share, please contact us.