Salsburg Refining Co, Ltd 0-4-4 "Forney" Locomotives in the USA

Ringaboy: Retro Railware

Modern fabrics meet classic heritage looks. Unique & comfortable retro rail logo shirts & tops for ladies & men. Featuring crew, flowy, hoodies, long sleeve, scoop, slouchy, tank, thermal & V-neck styles. Custom & bulk inquiries welcome.

Class Details by Steve Llanso of Sweat House Media

Class 4 (Locobase 13485)

Data from Baldwin Locomotive Works Specification for Engines as digitized by the DeGolyer Library of Southern Methodist University, Volume 32, p. 293. Baldwin works numbers were 24503 in July 1904 and 32982 in September 1908.

The 3 and 4 were essentially identical to the Central Cambalache's #1, delivered to Cuba in 1906 (Locobase 13014), but set up for the 3-foot gauge. The 3's owner was listed as Lebermuth & Israel Planting Company Ltd but was lettered for the "Salsbury Refining Co, Ltd" in a later change in the specs. (One supposes the Salsburg fixed the y at some point.) The 4 arrived 4 years later.

Specifications by Steve Llanso of Sweat House Media
Class4
Locobase ID13,485
RailroadSalsburg Refining Co, Ltd
CountryUSA
Whyte0-4-4T
Number in Class1
Road Numbers4
Gauge3'
Number Built1
BuilderBurnham, Williams & Co
Year1908
Valve GearStephenson
Locomotive Length and Weight
Driver Wheelbase (ft / m)4 / 1.22
Engine Wheelbase (ft / m)14.17 / 4.32
Ratio of driving wheelbase to overall engine wheebase 0.28
Overall Wheelbase (engine & tender) (ft / m)14.17 / 4.32
Axle Loading (Maximum Weight per Axle) (lbs / kg)
Weight on Drivers (lbs / kg)20,000 / 9072
Engine Weight (lbs / kg)32,000 / 14,515
Tender Loaded Weight (lbs / kg)
Total Engine and Tender Weight (lbs / kg)32,000
Tender Water Capacity (gals / ML)550 / 2.08
Tender Fuel Capacity (oil/coal) (gals/tons / ML/MT)
Minimum weight of rail (calculated) (lb/yd / kg/m)17 / 8.50
Geometry Relating to Tractive Effort
Driver Diameter (in / mm)30 / 762
Boiler Pressure (psi / kPa)150 / 10.30
High Pressure Cylinders (dia x stroke) (in / mm)9" x 14" / 229x356
Tractive Effort (lbs / kg)4820 / 2186.32
Factor of Adhesion (Weight on Drivers/Tractive Effort) 4.15
Heating Ability
Firebox Area (sq ft / m2)25.90 / 2.41
Grate Area (sq ft / m2) 4.68 / 0.43
Evaporative Heating Surface (sq ft / m2)192 / 17.84
Superheating Surface (sq ft / m2)
Combined Heating Surface (sq ft / m2)192 / 17.84
Evaporative Heating Surface/Cylinder Volume186.26
Computations Relating to Power Output (More Information)
Robert LeMassena's Power Computation702
Same as above plus superheater percentage702
Same as above but substitute firebox area for grate area3885
Power L12339
Power MT515.66