Pickens 2-6-0 "Mogul" Locomotives of the USA


Class Details by Steve Llanso of Sweat House Media

Class 1 (Locobase 14679)

Data from DeGolyer, Vol 62, pp. 82. Works number was 51969 in June 1919.

South Carolina Upstate (the part of the state that rises into the Piedmont) was ill-served by railways for most of the steam era. The Pickens was a short line chartered in 1890 to run 19 miles (30.6 km) from Easley, South Carolina to Olenoy Gap through Pickens, the county seat and the most-elevated (above sea level) incorporated town in the state.

The only section completed was the 8 miles between Easley and Pickens. That short segment remained in service for decades, however, and this Mogul operated a mixed train over the line. It became known as the "Doodle Train" because it ran backward in one direction, the leading car reminding many of a doodle bug backing into its hole. Twelve times a day, the 1 traveled over the 50 lb/yard (25 kg/metre) rail from 1919 to 1946.

The 1 was scrapped in 1956. The Pickens, converted to diesel operation, continued for more than another half-century before railroad service ended in 2010 and the company filed for abandonment in September 2012. Proposals to turn the abandoned line into a walking and bike trail met resistance from trackside landowners who argued that the original charter required land granted to the road be returned to the original owners.

Specifications by Steve Llanso of Sweat House Media
Class1
Locobase ID14,679
RailroadPickens
CountryUSA
Whyte2-6-0
Number in Class1
Road Numbers1
GaugeStd
Number Built1
BuilderBaldwin
Year1919
Valve GearSouthern
Locomotive Length and Weight
Driver Wheelbase (ft)10.50
Engine Wheelbase (ft)17.67
Ratio of driving wheelbase to overall engine wheebase 0.59
Overall Wheelbase (engine & tender) (ft)43.75
Axle Loading (Maximum Weight per Axle) (lbs)
Weight on Drivers (lbs)83,000
Engine Weight (lbs)99,000
Tender Loaded Weight (lbs)60,000
Total Engine and Tender Weight (lbs)159,000
Tender Water Capacity (gals)3000
Tender Fuel Capacity (oil/coal) (gals/tons)6
Minimum weight of rail (calculated) (lb/yd)46
Geometry Relating to Tractive Effort
Driver Diameter (in)48
Boiler Pressure (psi)180
High Pressure Cylinders (dia x stroke) (in)16" x 24"
Tractive Effort (lbs)19,584
Factor of Adhesion (Weight on Drivers/Tractive Effort) 4.24
Heating Ability
Firebox Area (sq ft)102
Grate Area (sq ft)20.60
Evaporative Heating Surface (sq ft)1221
Superheating Surface (sq ft)
Combined Heating Surface (sq ft)1221
Evaporative Heating Surface/Cylinder Volume218.62
Computations Relating to Power Output (More Information)
Robert LeMassena's Power Computation3708
Same as above plus superheater percentage3708
Same as above but substitute firebox area for grate area18,360
Power L14463
Power MT355.63


If you have any railroad data such as diagram books, rail station plans or anything else that you would be willing to share, please contact us.